• de
  • en
  • sv

Electric Flow Heaters

Electric Flow Heaters

Easy to connect

The flow heaters are simple to connect to the boiler via an expansion pipe and docking socket or drainage tap. A circulation pump must be installed in order to safeguard water circulation.

Flow heater EK 13

13 kW, divided into 3 stages, controlled by mechanical thermostats and a main switch. It is chiefly used to supplement an existing boiler or hot water heater. The automatic electric system is easy to access under the lid and comes fitted as standard with a thermostat, overheating protector, operation indication, integrated switch and time delay.
D-Left-DarkOrange

 

Flow heater EK 15 E

15 kW, divided into 7 stages controlled by an electronic thermostat. It can be easily climate-controlled using an outdoor temperature compensator UTK-E and can also be controlled by a heat pump or another external signal 0-10 V.
The EK 15 E has a 7-stage load guard. The automatic electric system is easy to access under the lid and comes fitted as standard with a thermostat, overheating protector, operation indication, integrated switch and time delay.
D-Left-DarkOrange

 

K-060

Customise your own flow heater. All immersion heaters with an R50 connection and max. insertion length of 420 mm can be fitted, which means the power range is 1.5 kW to 12 kW. Also available in stainless steel, K-060 R.


EK 13 and EK 15.
An excellent addition when the heat pump is unable to provide enough
heat due to cold weather.


Immersion heater 9003 F fitted in K-060 Flow Heater.

 

Kontakta Värmebaronen: Tel 044-22 63 20